|
|
Toledo Swords ™ Battle Ready Reenactment Combat Swords
Toledo Swords ™ : Collectible Heirloom Armory
Subscribe to our Knightly News Newsletter, Today , and get a FREE Gift!
We are constantly adding new products so
Bookmark This Site
and come back frequently!
Click Here to visit our sister site RealCoolSavings
Click to Enlarge
Antiqued Paul Chen Torino Rapier Sword
by Hanwei
Item # RCPC2204NTS
The Antiqued Paul Chen Torino Rapier Sword
This fine Hanwei manufactured rapier sword is historically based on models of 17th century swept hilt rapiers of Italian ancestry.
The blade is made of forged high-carbon steel and it comes equipped with a leather scabbard.
The guard has an ornate design with straight quillons to protect the hand and for wrapping the fingers around to increase functionality and one’s grip strength.
This rapier and the matching main gauche blade (orderable upon request) produced by Hanwei are now
interchangeable with blunted Practical Sparring blades (orderable upon request) , which are designed for safety in rapier sparring. Also available are non-antiqued versions of the Torino Rapier and matching Main Gauche.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 46"
Blade Length: 37"
Blade Material: High-carbon forged steel blade , tempered un-edged , sharp point
interchangeable blunted Practical Sparring blades are orderable at $59.00 each
Handle: Black wire wrapped handle with antique black finish sculpted steel guard and pommel
Factory: Hanwei China
Designer: Paul Chen
Scabbard: leather
Rated: Fully Functional
$265.00 each
Click to Enlarge
Paul Chen Torino Rapier Sword
by Hanwei
Item # RCPC2204TS
The Paul Chen Torino Rapier Sword
This fine Hanwei manufactured rapier sword is historically based on models of 17th century swept hilt rapiers of Italian ancestry.
The blade is made of forged high-carbon steel and it comes equipped with a black leather scabbard.
The guard has an ornate design with straight quillons to protect the hand and for wrapping the fingers around to increase functionality and one’s grip strength.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 46"
High-carbon forged steel blade , tempered un-edged , sharp point
Factory: Hanwei China
Designer: Paul Chen
Scabbard included
replacement blades are orderable at $59.00 each
Rated: Fully Functional
$229.00 each
Click to Enlarge
Paul Chen Solingen Rapier Sword
by Hanwei
Item # RCCASSH2205TS
The Paul Chen Solingen Rapier Sword
The Solingen Rapier Sword is historically based on models of 17th century swepthilt rapiers of Germanic ancestry.
The Solingen Rapier with the matching Main Gauche
is an excellent rendition of the timely originals. The blades are constructed of forged high-carbon steel and are
equipped with leather scabbards. The guard has a beautiful design with S-curved quillons to protect the
hand and for wrapping the fingers around to increase one’s grip strength.
This rapier and the matching main gauche blade produced by Hanwei are now interchangeable with blunted
Practical Sparring blades (orderable upon request) , which are designed for safety in rapier sparring.
Also available are antiqued versions of the Solingen Rapier with matching main gauche (orderable upon request).
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 44 3/4"
Blade Length: 36 1/2"
Blade Material: High-carbon forged steel blade , tempered un-edged , sharp point
interchangeable blunted Practical Sparring blades are orderable at $59.00 each
Handle: Wire wrapped handle with sculpted steel guard and pommel
Perfect balance
Factory: Hanwei China
Designer: Paul Chen
Scabbard: leather
Rated: Fully Functional
$229.00 each
Click to Enlarge
Antiqued Paul Chen Solingen Rapier Sword
by Hanwei
Item # RCPC2205NTS
The Antiqued Paul Chen Solingen Rapier Sword
This fine Hanwei manufactured rapier sword is historically based on models of 17th century swept hilt rapiers of German ancestry. The blade is made of forged high-carbon steel and it comes equipped with a leather scabbard.
The guard has a beautiful design with S-curved quillons to protect the hand and for wrapping the fingers around to
increase functionality and one’s grip strength.
This rapier and the matching main gauche blade (orderable upon request) produced by Hanwei are now
interchangeable with blunted Practical Sparring blades (orderable upon request) , which are designed for safety in rapier sparring. Also available are non-antiqued versions of the Solingen Rapier with matching Main Gauche.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 44 3/4"
Blade Length: 36 1/2"
Blade Material: High-carbon forged steel blade , tempered un-edged , sharp point
interchangeable blunted Practical Sparring blades are orderable at $59.00 each
Handle: Black wire wrapped handle with antique black finish sculpted steel guard and pommel
Factory: Hanwei China
Designer: Paul Chen
Scabbard: leather
Rated: Fully Functional
$265.00 each
Click to Enlarge
Paul Chen Solingen Main Gauche Dagger
by Hanwei
Item # RCCASSH2208TS
The Paul Chen Solingen Main Gauche Dagger
The Solingen Main Gauche Dagger is historically based on models of 17th century main gauche daggers of Germanic ancestry.
The Solingen Main Gauche Dagger with the matching Rapier Sword
is an excellent rendition of the timely originals. The blades are constructed of forged high-carbon steel and are
equipped with leather scabbards.
This main gauche and the matching rapier blade produced by Hanwei are now interchangeable with blunted
Practical Sparring blades (orderable upon request) , which are designed for safety in rapier sparring.
Also available are antiqued versions of the Solingen Rapier
with matching main gauche (orderable upon request).
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 17 1/4"
Blade Length: 11 1/4"
Blade Material: High-carbon forged steel blade , tempered , sharp point
interchangeable blunted Practical Sparring blades are orderable at $45.00 each
Handle: Wire wrapped handle with steel guard and pommel
Perfect balance
Factory: Hanwei China
Designer: Paul Chen
Scabbard: leather
Rated: Fully Functional
$125.00 each
Click to Enlarge
Antiqued Paul Chen Gustav Rapier Sword
by Hanwei
Item # RCPC2206NTS
The Antiqued Paul Chen Gustav Rapier Sword
King Gustav II Adolf (1594-1632) was monarch of Sweden from 1611-1632.
In 1630 as a defensive maneuver, King Gustav II entered the Thirty Years’ War to secure the Swedish state and
church from danger. An excellent military tactician,
Gustav led an army of unusual quality, and his position was strengthened by alliances with France, Brandenburg, and Saxony.
At Lützen in 1632, the Swedes defeated Albrecht W.E. von Wallenstein's army,
but King Gustav was fatally wounded in battle.
This fine Hanwei manufactured rapier sword is historically based on the original
King Gustav II Adolf rapier sword and is truly fit for a king.
The blade is made of forged high-carbon steel and it comes equipped with a leather scabbard.
The guard of the rapier is quite impressive in design and has two shells to protect the hand.
This rapier and the matching main gauche blade (orderable upon request) produced by Hanwei are now
interchangeable with blunted Practical Sparring blades (orderable upon request) ,
which are designed for safety in rapier sparring. Also available are non-antiqued versions of the Gustav Rapier and matching
Main Gauche (orderable upon request).
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 45 1/2"
Blade Length: 36 7/8"
Blade Material: High-carbon forged steel blade , tempered un-edged , sharp point
interchangeable blunted Practical Sparring blades are orderable at $59.00 each
Handle: Black wire wrapped handle with antique black finish sculpted steel guard and pommel
Factory: Hanwei China
Designer: Paul Chen
Scabbard: leather
Rated: Fully Functional
$265.00 each
Click to Enlarge
Paul Chen Gustav Rapier Sword
by Hanwei
Item # RCCASSH2206TS
The Paul Chen Gustav Rapier Sword
King Gustav II Adolf (1594-1632) was monarch of Sweden from 1611-1632.
In 1630 as a defensive maneuver, King Gustav II entered the Thirty Years’ War to secure the Swedish state and
church from danger. An excellent military tactician,
Gustav led an army of unusual quality, and his position was strengthened by alliances with France, Brandenburg, and Saxony.
At Lützen in 1632, the Swedes defeated Albrecht W.E. von Wallenstein's army,
but King Gustav was fatally wounded in battle.
This fine Hanwei manufactured rapier sword is historically based on the original
King Gustav II Adolf rapier sword and is truly fit for a king.
The blade is made of forged high-carbon steel and it comes equipped with a leather scabbard.
The guard of the rapier is quite impressive in design and has two shells to protect the hand.
This rapier and the matching main gauche blade (orderable upon request) produced by Hanwei are now
interchangeable with blunted Practical Sparring blades (orderable upon request) ,
which are designed for safety in rapier sparring. Also available are non-antiqued versions of the Gustav Rapier and matching
Main Gauche (orderable upon request).
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 45 1/4"
Blade Length: 36 5/8"
Weight: 2lb 5oz
Point of Balance: 5"
Point of Percussion: 28"
Width at Guard: .75" Thickness at Guard: .25"
Width at Tip: .40" Thickness at Tip: .10"
Blade Material: High-carbon forged spring steel blade
interchangeable blunted Practical Sparring blades are orderable at $59.00 each
Handle: Black wire wrapped handle with antique black finish sculpted steel guard and pommel
Factory: Hanwei China
Designer: Paul Chen
Scabbard: leather
Excellent Balance
Rated: Fully Functional
$229.00 each
Click to Enlarge
Paul Chen Taza Cup Hilt Rapier Sword
by Hanwei
Item # RCCASSH2035TS
The Paul Chen Taza Cup Hilt Rapier Sword
Long extolled as the pinnacle of rapier design,
the "Spanish" or "Cup-Hilt" rapier undoubtedly combined style and function very effectively in 17th century Europe. The very best of these weapons featured beautifully pierced cups and pommels. Hanwei has replicated these to perfection and combined them with an elegantly tapered high-carbon steel blade in the "Taza" rapier (the name comes from the French, who called this style "a la Taza").
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 46 1/4"
Sword Weight: 2 lbs 1 oz
Blade Length: 38 1/4"
Blade Material: High-carbon forged steel blade , tapered
Factory: Hanwei China
Designer: Paul Chen
Scabbard: Leather covered
Rated: Fully Functional
$339.00 each
Click to Enlarge
Paul Chen Practical Basket Hilt Mortuary Sword
by Hanwei
Item # RCCASSH2076TS
The Paul Chen Practical Basket Hilt Mortuary Sword with Scabbard
The Paul Chen Practical Basket Hilt Mortuary Sword is built for the re-enactor.
Replicated from an original in the collection of the Royal Armouries in England , the Mortuary Hilt Sword is a classic example of a cavalry or dragoon officer’s sword of the 17th century English Civil War period. Deriving its name from the style of sword which memorialized King Charles I, who was executed in 1649, The Mortuary Hilt Sword’s steel basket is decorated with scrolled foliage .
The blade is unsharpened, with a 1/16” edged and a rounded tip, complying with the combat rules of many re-enactment societies.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 37"
Sword Weight: 2 lbs
Blade Length: 30 1/2"
Point of Balance: 4"
Point of Percussion: 29"
Width at Guard: 1.05"
Width at Tip: .52"
Thickness at Guard: .22"
Thickness at Tip: .11"
Blade Material: High-carbon forged steel blade , unsharpened
Factory: Hanwei China
Designer: Paul Chen
Scabbard: Leather covered
Rated: Fully Functional
Authentic styling
Great for re-enactors
$229.00 each
Click to Enlarge
Paul Chen Renaissance Musketeer Style Fencing Rapier
by Hanwei
Item # RCCASSH1032TS
The Paul Chen Renaissance Musketeer Style Fencing Rapier
The Paul Chen Renaissance Musketeer Style Fencing Rapier is built for the re-enactor.
Fencing in the Renaissance style plays a prominent part in historical re-enactment,
combining the quickness of light blades with the structure and spirit of the duel.
This Fencing Rapier, a standard in the sport, comes with a double-wide Epee
( Musketeer ) blade.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 41"
Sword Weight: 1 lb 7 oz
Blade Length: 33 7/8"
Handle length: 5"
Blade Material: High-carbon forged steel blade
Musketeer double-wide epee blade button tip
Factory: Hanwei China
Designer: Paul Chen
Rated: Fully Functional
Designed for the Renaissance fencer
Very quick
$189.00 each
Click to Enlarge
Paul Chen Practical Rapier Sword
by Hanwei
Item # RCCASSH1098TS
The Paul Chen Practical Rapier Sword
The Practical Rapier utilizes the SCA ( Society for Creative Anachronism )combat approved 43" Schlager blade.
The tapered blade form provides superior balance compared to the
traditional parallel sided schlagers of the same length, making for a faster sword. The high-carbon steel blade provides good flexibility and is button-tipped for safety.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 49 1/4"
Sword Weight: 2 lbs 5 oz
Blade Length: 43"
Blade Material: High-carbon forged steel blade , tapered , Button-tipped
replacement blades are orderable at $59.00 each
Factory: Hanwei China
Designer: Paul Chen
SCA approved
Rated: Fully Functional
$169.00 each
Click to Enlarge
Paul Chen Practical Rapier II Sword
by Hanwei
Item # RCCASSH1099TS
The Paul Chen Practical Rapier II Sword
The Practical Rapier II utilizes the SCA ( Society for Creative Anachronism )combat approved 37" Schlager blade.
The tapered blade form provides superior balance compared to the
traditional parallel sided schlagers of the same length, making for a faster sword.
The high-carbon steel blade provides good flexibility and is button-tipped for safety.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 43 1/2"
Sword Weight: 2 lbs 3 oz
Blade Length: 37"
Blade Material: High-carbon forged steel blade , tapered , Button-tipped
replacement blades are orderable at $59.00 each
Factory: Hanwei China
Designer: Paul Chen
SCA approved
Rated: Fully Functional
$169.00 each
Click to Enlarge
Paul Chen Bone Handled Swept Hilt Rapier Sword
by Hanwei
Item # RCCASSH1092TS
The Paul Chen Bone Handled Swept Hilt Rapier Sword
Swept Hilt Rapiers trace their origins to early 17th century Europe,
where swordplay with the Rapier sword was considered an essential part of a gentleman's education and was often used in resolving gentlemanly disagreements. Blades typically originated in Toledo or Solingen and would be hilted by regional smiths, resulting in many hilt styles.
This beautiful sword has a high-carbon steel blade and a very attractive solid steel ( not plated )
basket with a genuine bone grip. A rigid leather-covered scabbard is included.
This fully functional rapier sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 45 1/4"
Blade Length: 36 5/8"
Sword weight: 2 lb 2 oz
Blade Material: High-carbon forged steel blade
Handle: solid steel basket with a genuine bone grip
Factory: Hanwei China
Designer: Paul Chen
Scabbard: Leather covered
Rated: Fully Functional
$259.00 each
Click to Enlarge
Paul Chen Sir William Marshall Sword
by Hanwei
Item # RCCASSH2000TS
The Paul Chen Sir William Marshall Sword
The single-hand Sir William Marshall Sword sets new standards of quality and authenticity in broadsword construction.
The sword is based on an original , now in a British musuem , used by one of England’s finest knights,
Sir William Marshall, who served the crown faithfully under Henry II , Richard the Lionheart and Jack Lackland. The singlehand Sir William Marshall Sword is available with either a forged high-carbon steel blade (below) or a forged - folded Swedish powder steel Damascus blade ( orderable upon request - $819.00 ). Both blades are identical in handling characteristics and both are tempered to a tough HRC 52. The blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather covered with steel mounts. Truly a sword for the connoisseur.
This fully functional broad sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 40"
Sword Weight: 2 lbs 2 oz
Blade Length: 33 1/4"
Blade Material: High-carbon forged steel blade
Handle Material: Leather wrapped
Scabbard: Leather covered with steel mounts
Authentic replica of a museum piece
Excellent balance
Factory: Hanwei China
Designer: Paul Chen
Rated: Fully Functional
$339.00 each
Click to Enlarge
Paul Chen Practical Single Hand Sword
by Hanwei
Item # RCCASSH2046TS
The Paul Chen Practical Single Hand Sword
The Practical Single-Hand Sword is based on the
Sir William Marshall sword ,
so named for one of England’s finest knights of the latter half of the 12th century.
The sword is classically styled , with a cruciform hilt , wheel pommel and a ridged and fullered blade that is both stiff and surprisingly light. With a weight of less than 2 ½ lbs. , the sword can be wielded forcefully without undue wear and tear on the arm.
The Practical SingleHand Sword is styled on authentic historical swords but it is tailored to meet the needs of the re-enactor for stage combat at a very affordable price. This very popular and affordable weapon features authentic hilt styling , with a fully tempered un-edged and un-pointed blade.
The Practical Single Hand Sword is designed to withstand rugged use while providing the level of safety required
by many of today’s re-enactment societies. The blade is crafted from 1065 high-carbon steel ,
hardened to HRC 50 , which restricts edge notching to acceptable levels while providing resilience and
protection against brittleness. While the blade is substantial , it is fullered to provide balance and good handling characteristics.
The Practical SingleHand Sword blade features 1/16" wide edges and a rounded tip for safety.
The tang is also substantial , with radiused corners at the blade shoulder and no welds. The end of the tang is riveted over the pommel , which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grip is leather covered. The scabbard is fabricated in glass-filled resin, to provide great impact resistance , to eliminate swelling and to minimize blade corrosion problems. The scabbard now features belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona.
This fully functional broad sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 36 1/2"
Sword Weight: 2 lbs 7 oz
Blade Length: 30"
Blade Material: High-carbon forged steel blade 1/16" wide edges and a rounded tip for safety
Handle Material: Hardwood grip , Leather covered
Scabbard: Wood grained finish
Factory: Hanwei China
Designer: Paul Chen
Rated: Fully Functional
$125.00 each
Click to Enlarge
Paul Chen Practical Hand-and-a-Half Sword
by Hanwei
Item # RCCASSH2106TS
The Paul Chen Practical Hand-and-a-Half Sword
The Practical Hand and a Half sword is styled on a Albrecht II of Austria sword , a classic design from the early part of the 15th century , with a simple cruciform hilt , flattened diamond section blade and typical hand-and-a-half grip. With a weight of just 3 ¼ lbs. , the Practical Hand and a Half sword handles very well without tiring the reenactor during a long day in the field.
The styling of the Practical Hand and a Half Sword is based on an authentic historical sword but it is tailored to meet the needs of the re-enactor for stage combat at a very affordable price. This very popular and affordable weapon features authentic hilt styling , with a fully tempered un-edged and un-pointed blade.
The Practical Hand and a Half Sword is designed to withstand rugged use while providing the level of safety required
by many of today’s re-enactment societies. The blade is crafted from 1065 high-carbon steel ,
hardened to HRC 50 , which restricts edge notching to acceptable levels while providing resilience and
protection against brittleness. While the blade is substantial , it is fullered to provide balance and good handling characteristics.
The Practical HandandaHalf Sword blade features 1/16" wide edges and a rounded tip for safety.
The tang is also substantial , with radiused corners at the blade shoulder and no welds. The end of the tang is riveted over the pommel , which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grip is leather covered. The scabbard is fabricated in glass-filled resin, to provide great impact resistance , to eliminate swelling and to minimize blade corrosion problems. The scabbard now features belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most reenactors will decorate the scabbard to match their persona.
This fully functional broad sword is tailored to meet the demands of re-enactment and stage combat.
Overall Length: 43 3/4"
Sword Weight: 3 lbs 3 oz
Blade Length: 34"
Blade Material: High-carbon forged steel blade 1/16" wide edges and a rounded tip for safety
Handle Material: Hardwood grip , Leather covered
Scabbard: Wood grained finish
Factory: Hanwei China
Designer: Paul Chen
Rated: Fully Functional
$135.00 each
Ftront and Back Views
Click to Enlarge
Paul Chen Buckler Hand Cup Shield
by Hanwei
Item # RCCASAH2263TS
The Paul Chen Buckler Hand Cup Shield
The combination of the sword and buckler ( hand-cup shield ) was extensively used during the Middle Ages.
Typically , bucklers are small hand shields that are held by a fist-grip and are quite maneuverable.
The Buckler can be used to deflect blows or deliver punches.
The Buckler Hand Cup Shield can also double as a shield boss.
This fully functional buckler is tailored to meet the demands of reenactment and stage combat.
Width: 6 3/4"
Shield Weight: 12 oz
Steel construction
Historically accurate
Great for reenactors
Factory: Hanwei China
Designer: Paul Chen
Rated: Fully Functional
$27.50 each
Click to Enlarge
Two Handed Great Sword by Cold Steel
Item # RCCS88WGSTS
The Two Handed Great Sword by Cold Steel
The Two Handed Great Sword is the biggest sword manufactured by Cold Steel. But don't let its size fool you , as there is nothing awkward or clumsy about this awesome sword. Sure it's big and meant to be carried over the shoulder instead of in a scabbard , but it's extremely well balanced and easily wielded by people of larger stature and physical strength. Weighing 6 lbs. 13.5 oz. with a 397/8" high carbon steel blade , it will make short work of pikemen or swordsmen and will prove equally effective against modern rifle butts and bayonets. To protect the hands from opposing weapons , it features a large guard with side rings plus integral parrying hooks that allow the blade to be shortened for close range slashing and stabbing attacks. The handle is made of wood and covered with leather and is extra long to afford a full two handed grip. What's more , it's capped by a heavy steel pommel that helps counter balance its long blade and serves as an effective weapon in its own right. Each sword comes fully sharpened and battle ready and we're sure you will be thrilled with its fantastic fit and finish. If you're looking for the ultimate in big performance oriented swords , your search is over.
Overall Length: 55 1/4"
Blade Length: 39 7/8"
Blade Thickness: 7/32"
Weight: 109.5 oz.
Blade: 1050 high carbon steel
Handle: 15 3/8" long. Leather Wrapped
$499.99 each
Click to Enlarge
Hand-and-a-Half Sword by Cold Steel
with Scabbard
Item # RCCS88HNHTS
The Hand-and-a-Half Sword by Cold Steel
We would be hard pressed to think of a more versatile or effective sword than the "Bastard" or "Hand-and-a-Half Sword" offered here. For a sword of this size , it’s amazingly light and fast and tips the scales at approximately 3 lbs. Its 33 1/2" long blade is quite wide so it can produce deep shearing type cuts yet pointed enough to be effective in a thrusting attack. Its long handle is suitable for both a one or two handed grip and is fashioned out of wood covered in black leather. To balance the long blade the butt is capped with a beautiful "scent stopper" pommel which can be a lethal weapon in its own right. Every Hand-and-a-Half Sword reflects the highest standards in workmanship and materials and comes fully sharpened and ready for battle! To safely house the blade a very attractive scabbard made of wood covered with black leather and steel throat and chape is also included.
Overall Length: 42 5/8"
Blade Length: 33 1/2"
Blade Thickness: 1/5"
Weight: 49 oz.
Blade: 1050 high carbon steel
Handle: 9 1/8" long. Leather Wrapped
Sheath: Leather/Wood Scabbard with Steel Fittings
$399.99 each
Click to Enlarge
Warrior Series Katana Sword by Cold Steel
Fully Functional
Combat Ready
Item # RCCS88BKTS
The Warrior Series Katana Sword by Cold Steel
The Cold Steel Warrior Series Katana sword is expertly crafted ,
with attention paid to every detail , making this the ideal collector's choice.
If you’re in the market for a strong, good looking, reasonably priced fully functional combat ready Japanese sword ,
we know you’ll be happy to own one of these.
Overall Length: 40 3/4”
Blade Length: 29 3/8”
Blade Thickness: 9/32”
Blade Material: 1050 High Carbon Steel , Sharp
Handle Material: Samé (Ray Skin) handle with black braid cord with brass Menuki
Sword Weight: 40.6 oz.
Scabbard: Black Lacquered Wood
Fully Functional and Battle Ready
$549.99 each
Click to Enlarge
Gim Sword by Cold Steel
with Scabbard
Item # RCCS88GTS
The Gim Sword by Cold Steel
There are two basic types of straight bladed swords used in China. One is fairly long and heavy known as the Wu Jian or "Martial Sword". The other is substantially lighter and called a Wen Jian or "Scholar's Sword" and was primarily carried for personal self defense. After studying books and video tapes on the history and use of both weapons , Cold Steel decided to make their own battle worthy Gim (Wu Jian) for serious collectors and practitioners of Chinese Martial Arts. The blade of their Wu Jian is made out of 1050 spring steel and measures 30" long by 11/2" wide. For cutting and slashing , both edges are quite sharp and they terminate in a strong , useful point for stabbing. The traditionally styled guard and pommel are cast out of thick sturdy brass and fit snugly on a stout Rosewood handle that is both highly decorative as well as functional.
The Gim Sword comes with an excellent wood scabbard with brass throat , chape and sword rings and can be worn suspended from the belt or slung over the shoulder.
Overall Length: 36 1/2"
Blade Length: 30"
Blade Thickness: 1/4"
Weight: 38.8 oz.
Blade: 1050 steel
Handle: 6 1/2" long. Rosewood
Sheath: Hardwood Scabbard with Brass Fittings
$449.99 each
Warning:
All Edged Weapons, Battle Ready or Not, May Injure, Kill and/or Become Damaged if Used Improperly
Read About Sword Care
Home
More Battle Ready Reenactment Combat Swords
|
|
